How to End a Call on a Relay

How to End a Call on a Relay

Objective

  1. End a direct call from a Relay device

Environment/Applies To

  1. Relay device

Procedure

  1. Tap the Relay Assistant button quickly 2 times
  2. The Relay will announce that the call has ended

    • Related Articles

    • How to use a Relay+

      How to use your Relay? Powering a Relay Off/On: To power on or power off your Relay hold down the Volume Up (+) button for 5 seconds. Sending a Message: Press and hold the talk button, and say your message. Release the button when finished. Making a ...

    • Relay Assistant Commands

      Relay Assistant Commands There are several different commands available for the Relay device. These commands can be accessed by pressing and holding down the assistant/channel button as seen below: While holding down this button, state one of the ...

    • Relay+ Won't Power On

      Symptoms Relay+ will not power on Environment/Applies To Relay+ Resolution Remove the Relay+ from its case if one is in use Connect the Relay+ to the USB-C charging cable and charging brick that came in the box Plug the charging brick into a wall ...

    • Relay+ has No Audio

      Symptoms Relay+ has no audio Environment/Applies To Relay+ Resolution Remove the Relay+ from its case if one is in use Tap the Volume Up (+) button multiple times to ensure the volume is on high Tap the Assistant button so the device will tell you ...

    • Relay+ is Offline

      Symptoms Relay+ is offline showing 3 Red LEDs Environment/Applies To Relay+ Resolution Remove the Relay+ from its case if one is in use Tap the Assistant Button to see if the device will provide you an error or reconnect If you are provided with an ...