How to Log Into A Device Using Voice Based Log In

How to Log Into A Device Using Voice Based Log In

Overview

  1. Voice Based Log In is available for customers using user profiles, who want the ability to log into devices using a simple voice command. To have this feature enabled, please reach out to your Customer Success Representative. 

Environment / Applies To

  1. Relay Devices 

Procedure 

WarningImportant Note:
  1. The device must be unassigned in order to log in a new profile. 
  2. A device can only be logged into one profile at a time. If a device is logged into another device, it must be logged out on the device, or unassigned in Dash, before a new device can be logged into that profile. 

How to Log Into A Relay Device

  1. Get an unassigned Relay Device
  2. Hold the Relay Assistant and say "Log in {User Name}"
    1. Its important to note to use Voice Based Log In, you will need to know the full name of the profile you are logging in
  3. The devices will confirm it has been logged into the profile. Ensure the correct profile has been logged in by looking at the Relay screen for the device name. 

How to Log Out Of A Relay Device

  1. Press and hold the Relay Assistant button
  2. Say "Log Out"
  3. The device will state a log out confirmation 




    • Related Articles

    • How to Download Your Complete Device Inventory

      Objective Download a CSV that includes information about all devices in Dash Environment/Applies To Dash Procedure Go to dash.relaypro.com and click Sign In Log in with your email address and password In the search bar at the top of the screen type ...

    • How to use a Relay Device

      Objective To better understand how to use a Relay device Environment / Applies To Relay Devices All Relay Service Plans Overview Power a Relay+ Off/On To power on or power off your Relay+ hold down the Volume Up (+) button for 5 seconds. Sending a ...

    • How to Adjust GPS Location Frequency On A Relay Device

      Objective: By default, Relay Devices update with an outdoor GPS location every 10 minutes. If your operations require more frequent location updates, you can adjust this to every 60 seconds for your Relay Devices by following the steps outlined ...

    • How to View Your Device and User Inventory in Dash

      Objective View all devices, users, and a subset of related information within Dash Environment/Applies To Relay Dash Procedure Sign in to Dash Under Account click Inventory A table will be shown with the following information: Device/User Name User ...

    • Relay Device is Offline

      Symptoms Relay device is offline showing 3 Red LEDs Environment/Applies To Relay Devices Resolution Remove the Relay device from its case if one is in use Tap the Assistant Button to see if the device will provide you an error or reconnect If you are ...